Specialist+ Titan drill bit 4.2mm

€1.10 with VAT
€1.10 without VAT
Specialist+ Titanium metal drill bit is made of the top quality M2 steel with Titanium coating (TIN), which increases the drill hardness by 30% and adds to its rigidity. The Titanium coating reduces friction, allows faster action and prevents overheating, as well as prolongs drill's service life. Recommended for steel up to 1000 N/mm2, cast iron, aluminium, brass and copper. Twist drill bit with a 135 degree angle for harder materials and reliable sharpness.
Quantity

10520
4779039130564
Main | Hammers |
5-20 work days
• the look of the real item may be a bit beam from those in the photos;
• the product may not be in the original packaging.

You can pick up the goods free of charge at: Veiverių st. 153, LT-46417, Kaunas, Lithuania.

Delivery price depends on the weight of the product, the chosen delivery type and location. Our products can be deliver to most of the European countries. Please put an item into the basket and choose location where to deliver to see exact price*.

*The delivery price of oversized goods may be higher than when calculated by weight (eg: ladder), because one of the dimensions is over 2 meters and so on. There may also be a higher delivery cost for oversized boxes, such as a vacuum cleaner or large machine tool, where it takes up a large volume and must be transported on a pallet. In such cases, the customer is additionally warned about higher delivery costs and has the right to cancel the order, or pick up the goods by their own transport.

*Delivery to islands and less rural places are charged extra by our partners DPD.

After courier delivers parcel, inspect it carefully - the packaging must be undamaged. If you notice that the packaging of the delivered goods is damaged, you must not accept the parcel and note in the delivery and acceptance certificate which is provided by the courrier that it was damaged. Please inform us about damaged goods too by e-mail [email protected] or by phone +370 686 47 132.

Your purchased goods in Europe should reach you within 1-7 working days (weekends not included). Exact delivery times are written in the product card, where it shows if it is available from our main or second warehouse.

You can currently pay for the goods using the following payment methods:

Logo
Name
Information
Klarna
You will be directed to the Klarna payment options which are: credit/debit bank card, 4 installments, pay in 30 days, financing.
Paypal
There is an additional 3% charge for PayPal payment insurance which is taken directly by Paypal bank. This additional insurance fee is automatically added by the bank to cover the additional costs of Paypal customer service.
Bank transfer
You will need to pay according to the received pre-invoice, which we will send to you immediately after creating the order. It is important that you enter the order number in the payment destination. The details of the order will be specified in the sent e-mail.

5 other products in the same category:

HSS PRO TIN DIN 338 13.0
Irwin

HSS PRO TIN DIN 338 13.0

€10.69 with VAT €10.69 without VAT
Availability: 13 In Stock
DIN 338 Titanium. Cutting drills are made of high quality (HSS) high-speed steel and have a 2.5µ titanium nitride coating. TIN coating hardens the surface up to 80HRC and is wear-resistant. TIN coating causes less friction effect, therefore, a cutting drill drills faster and generates less heat. 135 degree double-sharpened drill is designed for faster speed and easier drill centering. Recommended to drill the materials the hardness limit of which is up to 1000 N/mm2.
Samedia

Diam.Drill Samedia DBV-E D6 M14

€14.03 with VAT €14.03 without VAT
Availability: 11 In Stock
Diamond crown (drill bit) designed to be used with an angle grinder; diamond drill bits made using the new advanced vacuum technology are characterized by durability and high efficiency. These drill bits are designed for both dry and wet drilling of extra hard materials. M14 screw fastening is designed for angle grinders. An angle grinder ensures high rotations needed for efficient performance of the drill bit. Effective dry drilling of hard materials such as stone mass or very hard stone mass tiles. Service life of the drill be can be extended using water.
Hammer drill QUATTRO 14/400 x 450 mm
Specialist

Hammer drill QUATTRO 14/400 x 450 mm

€16.51 with VAT €16.51 without VAT
Availability: 126 In Stock
Advantages: - Four-sided, one-piece, solid, hard-metal alloy - long service life Long service life. - Uniquely shaped spindle - efficient dust removal, robust drill Robust drill construction. - The drill is designed for minimal vibration and high performance. comfortable. - PGM certified - hole always the same diameter and geometry, pin will meet the tensile and shearing forces set by the factory. - Four tip disruptors ensure fast and easy drilling. The tool is used for: - Drilling reinforced concrete. - For drilling concrete.
Specialist

Specialist+ Titan drill bit 2.0mm 2pcs

€0.88 with VAT €0.88 without VAT
Availability: 1034 In Stock
Specialist+ Titanium metal drill bit is made of the top quality M2 steel with Titanium coating (TIN), which increases the drill hardness by 30% and adds to its rigidity. The Titanium coating reduces friction, allows faster action and prevents overheating, as well as prolongs drill's service life. Recommended for steel up to 1000 N/mm2, cast iron, aluminium, brass and copper. Twist drill bit with a 135 degree angle for harder materials and reliable sharpness.
Specialist+ Flat Bit 19mm
Specialist

Specialist+ Flat Bit 19mm

€1.64 with VAT €1.64 without VAT
Availability: 871 In Stock
Specialist+ spade drill bit designed for drilling of various types of wood. Precision drilling ensured by the central tip. HEX shank fastening ensures maximum bond with the drill bit.