Specialist+ Cobalt drill bit 8.0mm

€4.31 with VAT
€4.31 without VAT
Specialist+ Cobalt drill bits made of HSS steel m35 with 5% cobalt (Co). Specialist+ HSS COBALT metal drill bits are designed for extra hard materials of up to 1100 N/mm2 (steel V2A, V4A), cast iron, titanium. Twist drill bit with a 135 degree angle for harder materials and reliable sharpness.
Quantity

10382
4779039130915
Main | Hammers |
5-20 work days
• the look of the real item may be a bit beam from those in the photos;
• the product may not be in the original packaging.

You can pick up the goods free of charge at: Veiverių st. 153, LT-46417, Kaunas, Lithuania.

Delivery price depends on the weight of the product, the chosen delivery type and location. Our products can be deliver to most of the European countries. Please put an item into the basket and choose location where to deliver to see exact price*.

*The delivery price of oversized goods may be higher than when calculated by weight (eg: ladder), because one of the dimensions is over 2 meters and so on. There may also be a higher delivery cost for oversized boxes, such as a vacuum cleaner or large machine tool, where it takes up a large volume and must be transported on a pallet. In such cases, the customer is additionally warned about higher delivery costs and has the right to cancel the order, or pick up the goods by their own transport.

*Delivery to islands and less rural places are charged extra by our partners DPD.

After courier delivers parcel, inspect it carefully - the packaging must be undamaged. If you notice that the packaging of the delivered goods is damaged, you must not accept the parcel and note in the delivery and acceptance certificate which is provided by the courrier that it was damaged. Please inform us about damaged goods too by e-mail [email protected] or by phone +370 686 47 132.

Your purchased goods in Europe should reach you within 1-7 working days (weekends not included). Exact delivery times are written in the product card, where it shows if it is available from our main or second warehouse.

You can currently pay for the goods using the following payment methods:

Logo
Name
Information
Klarna
You will be directed to the Klarna payment options which are: credit/debit bank card, 4 installments, pay in 30 days, financing.
Paypal
There is an additional 3% charge for PayPal payment insurance which is taken directly by Paypal bank. This additional insurance fee is automatically added by the bank to cover the additional costs of Paypal customer service.
Bank transfer
You will need to pay according to the received pre-invoice, which we will send to you immediately after creating the order. It is important that you enter the order number in the payment destination. The details of the order will be specified in the sent e-mail.

5 other products in the same category:

Specialist

Hammer Drill Bit SDS Plus 6,0x100/160

€2.48 with VAT €2.48 without VAT
Availability: 1730 In Stock
Advantages: - Improved hard metal anchorage allows drilling of harder materials, Improved hardening of hardened hardness and increased tool life. - The square-shaped carbide centering tip - precise drilling and The drilling process is precise and precise, with a perfectly round hole. - Unique design of the drill groove - efficient debris removal, fast fast drilling. - PGM certified - hole always the same diameter and geometry, pin will meet the tensile and shearing forces set by the factory. - SDS+ fastening standard. Tool used for: - For drilling various masonry materials. - For drilling concrete. - For drilling reinforced concrete. - For drilling bricks.
IR HSS PRO TIN DIN 338 1.0-CYL
Irwin

IR HSS PRO TIN DIN 338 1.0-CYL

€1.64 with VAT €1.64 without VAT
Availability: 24 In Stock
DIN 338 Titanium. Cutting drills are made of high quality (HSS) high-speed steel and have a 2.5µ titanium nitride coating. TIN coating hardens the surface up to 80HRC and is wear-resistant. TIN coating causes less friction effect, therefore, a cutting drill drills faster and generates less heat. 135 degree double-sharpened drill is designed for faster speed and easier drill centering. Recommended to drill the materials the hardness limit of which is up to 1000 N/mm2.
IRWIN HSS TURBOMAX 7.0 X 109
Irwin

IRWIN HSS TURBOMAX 7.0 X 109

€5.33 with VAT €5.33 without VAT
Availability: 3 In Stock
Benefits: • Jet Point tip - longer lasting sharpness, does not ride on the drilling surface. • 100º sharpening angle - faster drilling, better centring, no need to apply pressure when drilling. • Special edge design - clean drilled hole, extra round hole when drilling sheet steel. The tool is used for: • For sheet steel. • For sheet steel. • Aluminum. • For non-ferrous metals. • All types of wood. • Plastic.
Specialist+ carbide rotary burr KEL 10x25x6 mm
Specialist

Specialist+ carbide rotary burr KEL 10x25x6 mm

€8.25 with VAT €8.25 without VAT
Availability: 281 In Stock
Carbide cutter for more convenient and easier metal surface treatment. Features and characteristics: • Perfect for surface smoothing. • For grinding of welding joints, hole widening, etc. • Compatible with both pneumatic linear grinders and electric and cordless screwdrivers/drills. • Shaft diameter: 6 mm. • Shape: L (rounded cylinder). • Cutter diameter: 10 mm. • Cutter operating length: 25 mm.