Hammer drill QUATTRO 12/400 x 450 mm

€16.21
€16.21
Shipping to Itella Smartpost - For free!
Advantages: - Four-sided, one-piece, solid, hard-metal alloy - long service life Long service life. - Uniquely shaped spindle - efficient dust removal, robust drill Robust drill construction. - The drill is designed for minimal vibration and high performance. comfortable. - PGM certified - hole always the same diameter and geometry, pin will meet the tensile and shearing forces set by the factory. - Four tip disruptors ensure fast and easy drilling. The tool is used for: - Drilling reinforced concrete. - For drilling concrete.
Quantity

9606
4779039132506
New
default shipping time text
Itella Smartpost - For free!
DPD carrier - 4.59 EUR
• the look of the real item may be a bit beam from those in the photos;
• the product may not be in the original packaging.

Data sheet

Delivery time
6-10 work days

You can pick up the goods free of charge at: Veiverių st. 153, LT-46417, Kaunas, Lithuania.

Delivery price depends on the weight of the product, the chosen delivery type and location. Our products can be deliver to most of the European countries. Please put an item into the basket and choose location where to deliver to see exact price*.

*The delivery price of oversized goods may be higher than when calculated by weight (eg: ladder), because one of the dimensions is over 2 meters and so on. There may also be a higher delivery cost for oversized boxes, such as a vacuum cleaner or large machine tool, where it takes up a large volume and must be transported on a pallet. In such cases, the customer is additionally warned about higher delivery costs and has the right to cancel the order, or pick up the goods by their own transport.

*Delivery to islands and less rural places are charged extra by our partners DPD.

After courier delivers parcel, inspect it carefully - the packaging must be undamaged. If you notice that the packaging of the delivered goods is damaged, you must not accept the parcel and note in the delivery and acceptance certificate which is provided by the courrier that it was damaged. Please inform us about damaged goods too by e-mail [email protected] or by phone +370 686 47 132.

Your purchased goods in Europe should reach you within 1-7 working days (weekends not included). Exact delivery times are written in the product card, where it shows if it is available from our main or second warehouse.

You can currently pay for the goods using the following payment methods:

Logo
Name
Information
Klarna
You will be directed to the Klarna payment options which are: credit/debit bank card, 4 installments, pay in 30 days, financing.
Paypal
There is an additional 3% charge for PayPal payment insurance which is taken directly by Paypal bank. This additional insurance fee is automatically added by the bank to cover the additional costs of Paypal customer service.
Bank transfer
You will need to pay according to the received pre-invoice, which we will send to you immediately after creating the order. It is important that you enter the order number in the payment destination. The details of the order will be specified in the sent e-mail.

Trumpai apie prekę

Keturgubas grąžtas QUATTRO 12/400 x 450 mm yra sukurtas iš tvirto kietmetalio lydinio, kuris užtikrina ilgą naudojimo laiką ir efektyvų darbą. Jo unikalios formos vija leidžia efektyviai pašalinti dulkes ir sumažinti vibracijas, kas daro gręžimą komfortiškesnį. Be to, PGM sertifikatas užtikrina nuoseklumą gręžiant skyles.

Prekės privalumai

  • Keturgubas, vientisas ir tvirtas kietmetalio lydinys užtikrina ilgalaikį naudojimą ir patikimumą.
  • Unikali vijos forma leidžia efektyviai pašalinti dulkes, kas pagerina darbo kokybę.
  • Minimalios vibracijos užtikrina, kad darbas būtų komfortiškas ir mažiau varginantis.
  • PGM sertifikatas garantuoja, kad skylės visada bus vienodo skersmens ir geometrijos.
  • Keturios antgalio ardymo viršūnėlės leidžia greitą ir lengvą gręžimą, todėl sumažėja darbo laikas.
  • Idealus pasirinkimas armuotam betonui ir betonui gręžti.

Prekės trūkumai

  • Kainos lygis gali būti šiek tiek aukštas, tačiau atitinka kokybę.
  • Reikalauja tam tikros patirties naudojant specializuotus grąžtus.

⚠️ This is the opinion of artificial intelligence!

5 other products in the same category:

TCT drill bit 8.0

€12.19 with VAT €12.19 without VAT
TCT drills are designed for drilling very hard and abrasive materials. Suitable for tempered steel up to 50 HRC in accordance with Rockwell, excellently and cleanly drill cement fiber boards. Quadruple sharpening reduces friction and increases efficiency. It is advised to use 3-6% cooling emulsion when drilling hard metals; this extends the service life of the drill.

HSS drill bit 5.2mm

€1.98 with VAT €1.98 without VAT
Metal: - HSS COBALT metal, steel with 5% cobalt, less heating (drilling drilling for longer periods of time) and is stronger. Shape and construction: - Double drill sharpening. - 135° drill tip allows for straightness when drilling harder drill bits. The drill bit is designed to drill through steeper materials. - Hardened, gold surface finish for greater durability. - Professional shank machining for precision drilling and fast chip removal For fast deburring. - Set of 10 pieces for this drill. Applications: - In V2A steel drilling. - In V4A steel drilling. - In V4A cast iron drilling. - In titanium drilling. - Drilling of hard materials up to 1100 N/mm2.

Plastic hole cutter 68 mm for styrofoam

€1.67 with VAT €1.67 without VAT
Polystyrene cutter to prepare the space for the stud pin when it is to be inserted. After the polystyrene has been milled and the stud has been inserted. The polystyrene tablet shall be used to fill the milled area.

HSS PRO DIN 338 9.50 QUAD PK5

€13.34 with VAT €13.34 without VAT
Made of high quality M2 steel. Precisely accurate. Black oxide coating, an additional protection from corrosion. Convenient informative package. Drill metal up to 900 N/mm2. IRWIN HSS metal cutting drills are designed to drill carbon, alloy, constructive steel, cast iron, wood and plastic.

Bit, Router TCT, Dovetail 15x14x14mm

€14.52 with VAT €14.52 without VAT
Angle milling cutter for shaping skeleton tails STANLEY FATMAX TCT Working diameter: 14.3mm. Working length: 13.5mm. Stem thickness: 8mm.