• Out-of-Stock
  • Out-of-Stock

5 vnt. grąžto antgalių Bosch 2608900263 (18 x 200 x 340 mm)

€165.43 with VAT
€165.43 without VAT
Shipping to Itella Smartpost - For free!
Quantity
Out-of-Stock

7590
4059952533377
Main | Hammers |
Itella Smartpost - For free!
DPD carrier - 5.39 EUR
• the look of the real item may be a bit beam from those in the photos;
• the product may not be in the original packaging.

Data sheet

Total length
340 mm
Working length
200 mm
Tool holder
SDS-Max
Suitability of the material
Concrete, stone, granite, gneiss

You can pick up the goods free of charge at: Veiverių st. 153, LT-46417, Kaunas, Lithuania.

Delivery price depends on the weight of the product, the chosen delivery type and location. Our products can be deliver to most of the European countries. Please put an item into the basket and choose location where to deliver to see exact price*.

*The delivery price of oversized goods may be higher than when calculated by weight (eg: ladder), because one of the dimensions is over 2 meters and so on. There may also be a higher delivery cost for oversized boxes, such as a vacuum cleaner or large machine tool, where it takes up a large volume and must be transported on a pallet. In such cases, the customer is additionally warned about higher delivery costs and has the right to cancel the order, or pick up the goods by their own transport.

*Delivery to islands and less rural places are charged extra by our partners DPD.

After courier delivers parcel, inspect it carefully - the packaging must be undamaged. If you notice that the packaging of the delivered goods is damaged, you must not accept the parcel and note in the delivery and acceptance certificate which is provided by the courrier that it was damaged. Please inform us about damaged goods too by e-mail [email protected] or by phone +370 686 47 132.

Your purchased goods in Europe should reach you within 1-7 working days (weekends not included). Exact delivery times are written in the product card, where it shows if it is available from our main or second warehouse.

You can currently pay for the goods using the following payment methods:

Logo
Name
Information
Klarna
You will be directed to the Klarna payment options which are: credit/debit bank card, 4 installments, pay in 30 days, financing.
Paypal
There is an additional 3% charge for PayPal payment insurance which is taken directly by Paypal bank. This additional insurance fee is automatically added by the bank to cover the additional costs of Paypal customer service.
Bank transfer
You will need to pay according to the received pre-invoice, which we will send to you immediately after creating the order. It is important that you enter the order number in the payment destination. The details of the order will be specified in the sent e-mail.

5 other products in the same category:

IRWIN GRANITE 4.0X80XCYL
  • Out-of-Stock
Irwin

IRWIN GRANITE 4.0X80XCYL

€2.46 with VAT €2.46 without VAT
Availability: Out of stock
Designed to drill especially rigid materials such as granite, concrete. Hardmetal plate is specially hardened, therefore it perfectly adapted to drill even the most solid materials. Hardmetal is soldered in vacuum conditions at 1100 °C temperature, using bronze soldering paste ensures maximum adhesion of hardmetal and drill rod. Patented coil design to remove dust faster and that drill would not jam. Especially rigid chrome - vanadium steel consists of increased amount of carbon, more solid hardening, more rigid drill. Durable plastic package and trade stands for convenient marketing.
Hammer Drill Bit SDS Plus 6,0x150/210
  • Out-of-Stock
Specialist

Hammer Drill Bit SDS Plus 6,0x150/210

€3.48 with VAT €3.48 without VAT
Availability: Out of stock
Advantages: - Improved hard metal anchorage allows drilling of harder materials, Improved hardening of hardened hardness and increased tool life. - The square-shaped carbide centering tip - precise drilling and The drilling process is precise and precise, with a perfectly round hole. - Unique design of the drill groove - efficient debris removal, fast fast drilling. - PGM certified - hole always the same diameter and geometry, pin will meet the tensile and shearing forces set by the factory. - SDS+ fastening standard. Tool used for: - For drilling various masonry materials. - For drilling concrete. - For drilling reinforced concrete. - For drilling bricks.
Hammer drill QUATTRO 16/400 x 450 mm
  • Out-of-Stock
Specialist

Hammer drill QUATTRO 16/400 x 450 mm

€19.82 with VAT €19.82 without VAT
Availability: Out of stock
Advantages: - Four-sided, one-piece, solid, hard-metal alloy - long service life Long service life. - Uniquely shaped spindle - efficient dust removal, robust drill Robust drill construction. - The drill is designed for minimal vibration and high performance. comfortable. - PGM certified - hole always the same diameter and geometry, pin will meet the tensile and shearing forces set by the factory. - Four tip disruptors ensure fast and easy drilling. The tool is used for: - Drilling reinforced concrete. - For drilling concrete.
IRWIN HSS TURBOMAX 1.5 X 49
  • Out-of-Stock
Irwin

IRWIN HSS TURBOMAX 1.5 X 49

€3.83 with VAT €3.83 without VAT
Availability: Out of stock
Benefits: • Jet Point tip - longer lasting sharpness, does not ride on the drilling surface. • 100º sharpening angle - faster drilling, better centring, no need to apply pressure when drilling. • Special edge design - clean drilled hole, extra round hole when drilling sheet steel. The tool is used for: • For sheet steel. • For sheet steel. • Aluminum. • For non-ferrous metals. • All types of wood. • Plastic.