Hammer Drill Bit SDS Plus 16,0x400/460
Hammer Drill Bit SDS Plus 16,0x400/460
    Hammer Drill Bit SDS Plus 16,0x400/460

Hammer Drill Bit SDS Plus 16,0x400/460

€14.26
€14.26
Shipping to Itella Smartpost - For free!
Advantages: - Improved hard metal anchorage allows drilling of harder materials, Improved hardening of hardened hardness and increased tool life. - The square-shaped carbide centering tip - precise drilling and The drilling process is precise and precise, with a perfectly round hole. - Unique design of the drill groove - efficient debris removal, fast fast drilling. - PGM certified - hole always the same diameter and geometry, pin will meet the tensile and shearing forces set by the factory. - SDS+ fastening standard. Tool used for: - For drilling various masonry materials. - For drilling concrete. - For drilling reinforced concrete. - For drilling bricks.
Quantity

9562
4773005771645
New
Main | Tools | Mechanical (hand) tools | Hammers |
default shipping time text
Itella Smartpost - For free!
DPD carrier - 4.59 EUR
• the look of the real item may be a bit beam from those in the photos;
• the product may not be in the original packaging.

Data sheet

Delivery time
6-10 work days

You can pick up the goods free of charge at: Veiverių st. 153, LT-46417, Kaunas, Lithuania.

Delivery price depends on the weight of the product, the chosen delivery type and location. Our products can be deliver to most of the European countries. Please put an item into the basket and choose location where to deliver to see exact price*.

*The delivery price of oversized goods may be higher than when calculated by weight (eg: ladder), because one of the dimensions is over 2 meters and so on. There may also be a higher delivery cost for oversized boxes, such as a vacuum cleaner or large machine tool, where it takes up a large volume and must be transported on a pallet. In such cases, the customer is additionally warned about higher delivery costs and has the right to cancel the order, or pick up the goods by their own transport.

*Delivery to islands and less rural places are charged extra by our partners DPD.

After courier delivers parcel, inspect it carefully - the packaging must be undamaged. If you notice that the packaging of the delivered goods is damaged, you must not accept the parcel and note in the delivery and acceptance certificate which is provided by the courrier that it was damaged. Please inform us about damaged goods too by e-mail [email protected] or by phone +370 686 47 132.

Your purchased goods in Europe should reach you within 1-7 working days (weekends not included). Exact delivery times are written in the product card, where it shows if it is available from our main or second warehouse.

You can currently pay for the goods using the following payment methods:

Logo
Name
Information
Klarna
You will be directed to the Klarna payment options which are: credit/debit bank card, 4 installments, pay in 30 days, financing.
Paypal
There is an additional 3% charge for PayPal payment insurance which is taken directly by Paypal bank. This additional insurance fee is automatically added by the bank to cover the additional costs of Paypal customer service.
Bank transfer
You will need to pay according to the received pre-invoice, which we will send to you immediately after creating the order. It is important that you enter the order number in the payment destination. The details of the order will be specified in the sent e-mail.

Trumpai apie prekę

Grąžtas „Specialist+ SDS+ 16x400/460 mm“ pasižymi pagerintu kietmetalio įtvirtinimu, leidžiančiu gręžti kietesnes medžiagas ir užtikrinančiu ilgesnį tarnavimo laiką. Jo keturkampės formos karbido centravimo galiukas garantuoja tikslų gręžimą, o unikalaus dizaino vijos griovelis efektyviai šalina šiukšles, užtikrindamas greitą darbo eigą.

Privalumai

  • Dėl pagerinto kietmetalio įtvirtinimo grąžtas puikiai tinka kietoms medžiagoms, padidindamas įrankio tarnavimo trukmę.
  • Keturkampis karbido centravimo galiukas užtikrina itin tikslius gręžimus ir idealiai apvalias skyles.
  • Unikalus vijos griovelio dizainas efektyviai šalina gręžimo metu susidarančias šiukšles.
  • PGM sertifikatas garantuoja, kad skylės visada bus vienodo skersmens ir geometrijos, atitinkančios visus standartus.
  • SDS+ tvirtinimo standartas leidžia lengvai ir greitai keisti grąžtus.
  • Šis įrankis puikiai tinka įvairioms mūro medžiagoms, betonui ir armuotam betonui gręžti.
  • Grąžtas taip pat gali būti naudojamas plytoms gręžti, todėl jis yra universalus sprendimas.

Trūkumai

  • Gali būti aukštesnė kaina lyginant su paprastais grąžtais, tačiau investicija greitai atsiperka ilgesniu tarnavimo laiku.
  • Šiek tiek sunkesnis už kitus grąžtus, kas gali būti nepatogu ilgesnį laiką dirbant.
⚠️ This is the opinion of artificial intelligence!

5 other products in the same category:

Hammer Drill Bit SDS Plus 6,5x250/310
Specialist

Hammer Drill Bit SDS Plus 6,5x250/310

€7.94 with VAT €7.94 without VAT
Advantages: - Improved hard metal anchorage allows drilling of harder materials, Improved hardening of hardened hardness and increased tool life. - The square-shaped carbide centering tip - precise drilling and The drilling process is precise and precise, with a perfectly round hole. - Unique design of the drill groove - efficient debris removal, fast fast drilling. - PGM certified - hole always the same diameter and geometry, pin will meet the tensile and shearing forces set by the factory. - SDS+ fastening standard. Tool used for: - For drilling various masonry materials. - For drilling concrete. - For drilling reinforced concrete. - For drilling bricks.
Specialist+ wood drill. 13 x 104/149
Specialist

Specialist+ wood drill. 13 x 104/149

€2.97 with VAT €2.97 without VAT
Specialist+ triple point drill bits designed for drilling of hard and soft wood. Special sharpening ensures precision and clean holes. No breaking of wood or raising of laminate while drilling through materials. Made of high quality HSS steel.
Hammer drill QUATTRO 14/150 x 210 mm
Specialist

Hammer drill QUATTRO 14/150 x 210 mm

€14.07 with VAT €14.07 without VAT
An exceptional feature of Specialist+ Quattro drills is triple hardmetal made of solid, especially robust hardmetal alloy. It ensures impeccable drilling quality even when drilling especially hard reinforced concrete. Uniquely shaped coil ensures efficient removal of dust and especially rigid structure of the drill which prevents the drill from breaking.
HSS PRO DIN 338 16.50 - SB 13
Irwin

HSS PRO DIN 338 16.50 - SB 13

€14.26 with VAT €14.26 without VAT
Made of high quality M2 steel. Precisely accurate. Black oxide coating, an additional protection from corrosion. Convenient informative package. Drill metal up to 900 N/mm2. IRWIN HSS metal cutting drills are designed to drill carbon, alloy, constructive steel, cast iron, wood and plastic.