Hammer Drill Bit SDS Plus 6,5x250/310

€7.94
€7.94
Shipping to Itella Smartpost - For free!
Advantages: - Improved hard metal anchorage allows drilling of harder materials, Improved hardening of hardened hardness and increased tool life. - The square-shaped carbide centering tip - precise drilling and The drilling process is precise and precise, with a perfectly round hole. - Unique design of the drill groove - efficient debris removal, fast fast drilling. - PGM certified - hole always the same diameter and geometry, pin will meet the tensile and shearing forces set by the factory. - SDS+ fastening standard. Tool used for: - For drilling various masonry materials. - For drilling concrete. - For drilling reinforced concrete. - For drilling bricks.
Quantity

9588
4779039131615
New
default shipping time text
Itella Smartpost - For free!
DPD carrier - 4.59 EUR
• the look of the real item may be a bit beam from those in the photos;
• the product may not be in the original packaging.

Data sheet

Delivery time
6-10 work days

You can pick up the goods free of charge at: Veiverių st. 153, LT-46417, Kaunas, Lithuania.

Delivery price depends on the weight of the product, the chosen delivery type and location. Our products can be deliver to most of the European countries. Please put an item into the basket and choose location where to deliver to see exact price*.

*The delivery price of oversized goods may be higher than when calculated by weight (eg: ladder), because one of the dimensions is over 2 meters and so on. There may also be a higher delivery cost for oversized boxes, such as a vacuum cleaner or large machine tool, where it takes up a large volume and must be transported on a pallet. In such cases, the customer is additionally warned about higher delivery costs and has the right to cancel the order, or pick up the goods by their own transport.

*Delivery to islands and less rural places are charged extra by our partners DPD.

After courier delivers parcel, inspect it carefully - the packaging must be undamaged. If you notice that the packaging of the delivered goods is damaged, you must not accept the parcel and note in the delivery and acceptance certificate which is provided by the courrier that it was damaged. Please inform us about damaged goods too by e-mail [email protected] or by phone +370 686 47 132.

Your purchased goods in Europe should reach you within 1-7 working days (weekends not included). Exact delivery times are written in the product card, where it shows if it is available from our main or second warehouse.

You can currently pay for the goods using the following payment methods:

Logo
Name
Information
Klarna
You will be directed to the Klarna payment options which are: credit/debit bank card, 4 installments, pay in 30 days, financing.
Paypal
There is an additional 3% charge for PayPal payment insurance which is taken directly by Paypal bank. This additional insurance fee is automatically added by the bank to cover the additional costs of Paypal customer service.
Bank transfer
You will need to pay according to the received pre-invoice, which we will send to you immediately after creating the order. It is important that you enter the order number in the payment destination. The details of the order will be specified in the sent e-mail.

Trumpai apie prekę

Grąžtas „Specialist+“ SDS+ 6,5x250/310 mm yra puikus pasirinkimas norint gręžti įvairias mūro medžiagas, įskaitant betoną ir plytas, dėl savo unikalių dizaino savybių ir aukštos kokybės medžiagų. Jo patvarumas ir tikslumas užtikrina ilgesnį tarnavimo laiką bei efektyvų darbo procesą.

Prekės privalumai

  • Dėl pagerinto kietmetalio įtvirtinimo grąžtas gali efektyviai gręžti net ir pačias kietas medžiagas, užtikrinant ilgesnį tarnavimo laiką.
  • Keturkampiai karbido centravimo galiukai suteikia tikslumą, leidžiantį sugręžti idealiai apvalias skyles.
  • Unikalaus dizaino vijos griovelis efektyviai šalina šiukšles, kas leidžia greičiau ir sklandžiau gręžti.
  • PGM sertifikatas garantuoja, kad skylės visada bus vienodo skersmens ir geometrijos, kas yra labai svarbu profesionaliam naudojimui.
  • SDS+ tvirtinimo standartas suteikia paprastą ir patikimą grąžto tvirtinimą į įrankius.

Šios prekės trūkumai

  • Kai kuriems vartotojams kaina gali pasirodyti šiek tiek didesnė.
  • Mūsų vartotojų nuomone, grąžtas gali netikti itin minkštoms medžiagoms.
  • Galima šiek tiek ribota naudojimo sritis, tik specializuotose gręžimo užduotyse.

⚠️ This is the opinion of artificial intelligence!

5 other products in the same category:

TCT drill bit 8.0

€12.19 with VAT €12.19 without VAT
TCT drills are designed for drilling very hard and abrasive materials. Suitable for tempered steel up to 50 HRC in accordance with Rockwell, excellently and cleanly drill cement fiber boards. Quadruple sharpening reduces friction and increases efficiency. It is advised to use 3-6% cooling emulsion when drilling hard metals; this extends the service life of the drill.

Specialist+ carbide rotary burr KEL 10x25x6 mm

€7.88 with VAT €7.88 without VAT
Carbide cutter for more convenient and easier metal surface treatment. Features and characteristics: • Perfect for surface smoothing. • For grinding of welding joints, hole widening, etc. • Compatible with both pneumatic linear grinders and electric and cordless screwdrivers/drills. • Shaft diameter: 6 mm. • Shape: L (rounded cylinder). • Cutter diameter: 10 mm. • Cutter operating length: 25 mm.

IRWIN CORDLESS 6.0X80X150 CYL

€8.26 with VAT €8.26 without VAT
Versatile CORDLESS drills. These are intended for boring: ceramics, masonry, concrete, wood, plastic, metal. It is perfectly suitable for accumulator drills and drills without hammers. Unique hard metal sharpening: '4 angles'. It does not require extensive pressure while drilling. Up to 100 % more holes using accumulator drill. It centers well and does not skid on the surface. Patented design of a turn for quicker removal of dust, which allows avoiding drill seizing. Particularly durable chromium-vanadium steel with increased amount of carboniferous, harder tempering, more enduring drill. Heavy-duty plastic packing and trade stands for comfortable trading

Specialist+ Forstner bit TCT 45 x 90 mm

€8.26 with VAT €8.26 without VAT
Specialist+ Forstner type wave cutter designed for extra smooth drilling of special holes for installation of furniture hinges on furniture panels. High quality sold metal ensures long service life.

Masonry drill bit Specialist 20x160/200

€4.64 with VAT €4.64 without VAT
- Sharp hardmetal - faster drilling. - The drill bit is designed to prevent jamming and remove dust quickly. The tool is used for: - For drilling various masonry materials. - For drilling concrete.