Bit holder 1/4"x1/4"

€1.64
€1.64
Shipping to Itella Smartpost - For free!
10 mm nozzle holder for the use of torsion nozzles with with a ratchet wrench. Made of CR-V steel 10 mm.
Quantity

10651
5906741644136
New
default shipping time text
Itella Smartpost - For free!
DPD carrier - 4.59 EUR
• the look of the real item may be a bit beam from those in the photos;
• the product may not be in the original packaging.

Data sheet

Delivery time
6-10 work days

You can pick up the goods free of charge at: Veiverių st. 153, LT-46417, Kaunas, Lithuania.

Delivery price depends on the weight of the product, the chosen delivery type and location. Our products can be deliver to most of the European countries. Please put an item into the basket and choose location where to deliver to see exact price*.

*The delivery price of oversized goods may be higher than when calculated by weight (eg: ladder), because one of the dimensions is over 2 meters and so on. There may also be a higher delivery cost for oversized boxes, such as a vacuum cleaner or large machine tool, where it takes up a large volume and must be transported on a pallet. In such cases, the customer is additionally warned about higher delivery costs and has the right to cancel the order, or pick up the goods by their own transport.

*Delivery to islands and less rural places are charged extra by our partners DPD.

After courier delivers parcel, inspect it carefully - the packaging must be undamaged. If you notice that the packaging of the delivered goods is damaged, you must not accept the parcel and note in the delivery and acceptance certificate which is provided by the courrier that it was damaged. Please inform us about damaged goods too by e-mail [email protected] or by phone +370 686 47 132.

Your purchased goods in Europe should reach you within 1-7 working days (weekends not included). Exact delivery times are written in the product card, where it shows if it is available from our main or second warehouse.

You can currently pay for the goods using the following payment methods:

Logo
Name
Information
Klarna
You will be directed to the Klarna payment options which are: credit/debit bank card, 4 installments, pay in 30 days, financing.
Paypal
There is an additional 3% charge for PayPal payment insurance which is taken directly by Paypal bank. This additional insurance fee is automatically added by the bank to cover the additional costs of Paypal customer service.
Bank transfer
You will need to pay according to the received pre-invoice, which we will send to you immediately after creating the order. It is important that you enter the order number in the payment destination. The details of the order will be specified in the sent e-mail.

Trumpai apie prekę

Antgalių laikiklis 1/4 x 1/4 yra praktiškas įrankis, skirtas naudoti su sukimo antgaliais. Jis pagamintas iš tvirtos CR-V plieno medžiagos, suteikiančios patikimumą ir ilgaamžiškumą. Šis laikiklis leidžia efektyviau dirbti su terkšliniais raktais, o 10 mm dydis užtikrina gerą suderinamumą su plačiu antgalių asortimentu.

Prekės privalumai

  • Pagamintas iš aukštos kokybės CR-V plieno, kuris užtikrina didelį atsparumą nusidėvėjimui ir ilgaamžiškumą.
  • 10 mm dydis puikiai tinka daugumai standartinių antgalių, todėl jis yra universalus įrankis.
  • Naudodamiesi šiuo laikikliu, galite efektyviau ir greičiau atlikti darbus su terkšliniais raktais.
  • Patogus dizainas leidžia lengvai keisti antgalius, taip padidinant darbo našumą.
  • Kompaktiškas dydis užtikrina patogų laikymąsi ir transportavimą.

Šios prekės trūkumai

  • Nėra iš karto įtrauktų antgalių komplekte, kaip gali tikėtis kai kurie vartotojai.
  • Gali būti, kad kai kuriems naudotojams trūks papildomo sukimo momento naudojant šį laikiklį.

⚠️ This is the opinion of artificial intelligence!

5 other products in the same category:

Socket 1/2 22mm.

€2.12 with VAT €2.12 without VAT
Made of very rigid CR-V steel. Precise geometry and rigid steel warrant long life service.

Screwdriver bit TX20

€1.74 with VAT €1.74 without VAT
- Nozzle for wood screws with TORX head with additional recess. - The protrusion at the end of the tip increases the tip's grip on the screw, which results in less risk of scratching the galvanised head when turning. - Made in Germany.

Specialist+ TITAN CARBON PZ2 25 mm. 2 pcs.

€4.80 with VAT €4.80 without VAT
• Manufacturer Specialist+ • Tip type PZ • Length of twist tip 25 mm • Bushing type Hex 1/4 • Nozzle size PZ2 Double TITAN-CARBON coating - durable surface, longer use. Due to the low friction of the tip coating, the tip will not slip out of the socket and will not rotate. Precise tip geometry - perfect grip on the screw.

IR IMPACT DBL IB PZ1 60 mm 2pc

€4.40 with VAT €4.40 without VAT
Construction: - Precise nozzle geometry - for even more performance. - Special groove for use with IRWIN magnetic screw for impact drivers. - Made of high quality steel. Advantages: - Withstands high loads. - High-strength, high wear resistance.

Specialist+ PH2 25 mm. with depth stop 2 pcs.

€2.93 with VAT €2.93 without VAT
• Manufacturer Specialist+ • Tip type PH2. • Twist tip length 25 mm. • Type of shank Hex 1/4. Advantages: The screw is screwed in as far as recommended. S2 premium steel for strength and durability. Steel hardened in several stages for maximum strength. Precise geometry of the tips - perfect grip on the screw.