TWIST DRILL BITS 6.0 X 103

€2.66
€2.66
Shipping to Itella Smartpost - For free!
Designed for drilling hard and soft wood. A more accurate and cleaner hole is drilled due to special sharpening. Does not break wood and does not dislodge laminate when drilling through. Made of high-quality steel.
Quantity

10590
5709131134596
New
default shipping time text
Itella Smartpost - For free!
DPD carrier - 4.59 EUR
• the look of the real item may be a bit beam from those in the photos;
• the product may not be in the original packaging.

Data sheet

Delivery time
6-10 work days

You can pick up the goods free of charge at: Veiverių st. 153, LT-46417, Kaunas, Lithuania.

Delivery price depends on the weight of the product, the chosen delivery type and location. Our products can be deliver to most of the European countries. Please put an item into the basket and choose location where to deliver to see exact price*.

*The delivery price of oversized goods may be higher than when calculated by weight (eg: ladder), because one of the dimensions is over 2 meters and so on. There may also be a higher delivery cost for oversized boxes, such as a vacuum cleaner or large machine tool, where it takes up a large volume and must be transported on a pallet. In such cases, the customer is additionally warned about higher delivery costs and has the right to cancel the order, or pick up the goods by their own transport.

*Delivery to islands and less rural places are charged extra by our partners DPD.

After courier delivers parcel, inspect it carefully - the packaging must be undamaged. If you notice that the packaging of the delivered goods is damaged, you must not accept the parcel and note in the delivery and acceptance certificate which is provided by the courrier that it was damaged. Please inform us about damaged goods too by e-mail [email protected] or by phone +370 686 47 132.

Your purchased goods in Europe should reach you within 1-7 working days (weekends not included). Exact delivery times are written in the product card, where it shows if it is available from our main or second warehouse.

You can currently pay for the goods using the following payment methods:

Logo
Name
Information
Klarna
You will be directed to the Klarna payment options which are: credit/debit bank card, 4 installments, pay in 30 days, financing.
Paypal
There is an additional 3% charge for PayPal payment insurance which is taken directly by Paypal bank. This additional insurance fee is automatically added by the bank to cover the additional costs of Paypal customer service.
Bank transfer
You will need to pay according to the received pre-invoice, which we will send to you immediately after creating the order. It is important that you enter the order number in the payment destination. The details of the order will be specified in the sent e-mail.

Trumpai apie prekę

Medžio grąžtas 6 x 67/103 mm pasižymi specialia viršūnės forma, kuri padeda išvengti medienos lūžių ir laminato pakėlimo. Smaili viršūnė užtikrina tikslų gręžimą, o plati vijos forma leidžia greičiau atlikti darbą. Šis įrankis yra tinkamas naudoti tiek minkštai, tiek kietai medienai, taip pat laminuotai medienai.

Prekės privalumai

  • Speciali viršūnės forma leidžia efektyviau gręžti, nes išvengiama medienos lūžių.
  • Smaili viršūnė garantuoja didesnį tikslumą gręžiant.
  • Plati vijos forma užtikrina greitesnį gręžimo procesą.
  • Puikiai tinka tiek minkštai, tiek kietai medienai, tad universalaus naudojimo privalumas.
  • Galima naudoti laminuotai medienai, kas padidina įrankio funkcionalumą.

Šios prekės trūkumai

  • Kai kurie vartotojai gali rasti, kad grąžtas nėra pats patvariausias, tačiau tai nėra didelė problema, jei naudojamas pagal paskirtį.
  • Didesnio dydžio grąžtai gali būti sunkesni, todėl gali būti sudėtingiau gręžti ilgiau.

⚠️ This is the opinion of artificial intelligence!

5 other products in the same category:

HSS PRO TIN DIN 338 2.0 - CYL 2Pcs

€2.12 with VAT €2.12 without VAT
DIN 338 Titanium. Cutting drills are made of high quality (HSS) high-speed steel and have a 2.5µ titanium nitride coating. TIN coating hardens the surface up to 80HRC and is wear-resistant. TIN coating causes less friction effect, therefore, a cutting drill drills faster and generates less heat. 135 degree double-sharpened drill is designed for faster speed and easier drill centering. Recommended to drill the materials the hardness limit of which is up to 1000 N/mm2.

HSS PRO DIN 338 2.00 - SB CYL

€3.68 with VAT €3.68 without VAT
Made of high quality M2 steel. Precisely accurate. Black oxide coating, an additional protection from corrosion. Convenient informative package. Drill metal up to 900 N/mm2. IRWIN HSS metal cutting drills are designed to drill carbon, alloy, constructive steel, cast iron, wood and plastic.

HSS PRO DIN 338 9.50 QUAD PK5

€13.34 with VAT €13.34 without VAT
Made of high quality M2 steel. Precisely accurate. Black oxide coating, an additional protection from corrosion. Convenient informative package. Drill metal up to 900 N/mm2. IRWIN HSS metal cutting drills are designed to drill carbon, alloy, constructive steel, cast iron, wood and plastic.

Tile & Drill Bit 8mm

€3.29 with VAT €3.29 without VAT
Glass and Tile Drill Bits Drill with low RPM (300 RPM recommended). Water cooling recommended. No hammer action. For drilling glass, bottles, porcelain, ceramics. Rotary only.