TWIST DRILL BITS 3.0 X 67
TWIST DRILL BITS 3.0 X 67
    TWIST DRILL BITS 3.0 X 67

TWIST DRILL BITS 3.0 X 67

€2.55
€2.55
Shipping to Itella Smartpost - For free!
Designed for drilling hard and soft wood. A more accurate and cleaner hole is drilled due to special sharpening. Does not break wood and does not dislodge laminate when drilling through. Made of high-quality steel.
Quantity

10587
5709131134534
New
Main | Tools | Mechanical (hand) tools | Hammers |
default shipping time text
Itella Smartpost - For free!
DPD carrier - 4.59 EUR
• the look of the real item may be a bit beam from those in the photos;
• the product may not be in the original packaging.

Data sheet

Delivery time
6-10 work days

You can pick up the goods free of charge at: Veiverių st. 153, LT-46417, Kaunas, Lithuania.

Delivery price depends on the weight of the product, the chosen delivery type and location. Our products can be deliver to most of the European countries. Please put an item into the basket and choose location where to deliver to see exact price*.

*The delivery price of oversized goods may be higher than when calculated by weight (eg: ladder), because one of the dimensions is over 2 meters and so on. There may also be a higher delivery cost for oversized boxes, such as a vacuum cleaner or large machine tool, where it takes up a large volume and must be transported on a pallet. In such cases, the customer is additionally warned about higher delivery costs and has the right to cancel the order, or pick up the goods by their own transport.

*Delivery to islands and less rural places are charged extra by our partners DPD.

After courier delivers parcel, inspect it carefully - the packaging must be undamaged. If you notice that the packaging of the delivered goods is damaged, you must not accept the parcel and note in the delivery and acceptance certificate which is provided by the courrier that it was damaged. Please inform us about damaged goods too by e-mail [email protected] or by phone +370 686 47 132.

Your purchased goods in Europe should reach you within 1-7 working days (weekends not included). Exact delivery times are written in the product card, where it shows if it is available from our main or second warehouse.

You can currently pay for the goods using the following payment methods:

Logo
Name
Information
Klarna
You will be directed to the Klarna payment options which are: credit/debit bank card, 4 installments, pay in 30 days, financing.
Paypal
There is an additional 3% charge for PayPal payment insurance which is taken directly by Paypal bank. This additional insurance fee is automatically added by the bank to cover the additional costs of Paypal customer service.
Bank transfer
You will need to pay according to the received pre-invoice, which we will send to you immediately after creating the order. It is important that you enter the order number in the payment destination. The details of the order will be specified in the sent e-mail.

Trumpai apie prekę

Medžio grąžtas 3 x 37/67 mm yra specialiai suprojektuotas, kad užtikrintų tikslius ir greitus gręžimo rezultatus. Jo unikali viršūnės forma leidžia gręžti be medienos plyšimo, o smaili viršūnė užtikrina preciziškumą. Šis įrankis puikiai tinka dirbti su įvairiomis medienos rūšimis, įskaitant minkštą, kietmedį ir laminuotą medieną.

Prekės privalumai

  • Speciali viršūnės forma užtikrina, kad gręžiant nesusidarytų įtrūkimai medienoje ir nesukeltų laminato pakilimų.
  • Smaili viršūnė leidžia pasiekti didesnį tikslumą, todėl gręžimas yra tvarkingas.
  • Plati vijos forma padeda greitai ir efektyviai gręžti.
  • Puikiai tinka įvairioms medienos rūšims, įskaitant minkštą ir kietmedį.
  • Lengva valdyti, todėl tinka tiek profesionalams, tiek mėgėjams.

Šios prekės trūkumai

  • Kai kuriems vartotojams gali pasirodyti šiek tiek brangus, bet atsiperka dėl kokybės.
  • Reikia tiksliai pritaikyti, nes per daug spaudimo gali sugesti grąžtas, tačiau tai nesukelia didelių problemų.
⚠️ This is the opinion of artificial intelligence!

5 other products in the same category:

Samedia

Diam.Drill Samedia DBV-E D35 M14

€32.72 with VAT €32.72 without VAT
Diamond crown (drill bit) designed to be used with an angle grinder; diamond drill bits made using the new advanced vacuum technology are characterized by durability and high efficiency. These drill bits are designed for both dry and wet drilling of extra hard materials. M14 screw fastening is designed for angle grinders. An angle grinder ensures high rotations needed for efficient performance of the drill bit. Effective dry drilling of hard materials such as stone mass or very hard stone mass tiles. Service life of the drill be can be extended using water.
Hammer drill ARMATURE 10/100 x 160 mm
Specialist

Hammer drill ARMATURE 10/100 x 160 mm

€7.79 with VAT €7.79 without VAT
Triple Y-shaped tip is superior to hardmetal drills of any other type when drilling reinforced concrete, as the drill bit does not get stuck and does not stray off the path when thick Armature is hit at an angle but it drills through Armature at the spot you need.
Bits Blue Groove Power 16mm
Irwin

Bits Blue Groove Power 16mm

€18.75 with VAT €18.75 without VAT
Extreme Durability BI-METAL cutting edges provide long life in tough applications Full Screw Tip for ease of use and pull trough Tapered Flute for less binding and ease of use Tri-Flute design for faster chip ejection Compact Length designed to fit between studs in most common applications
Irwin

HSS PRO TIN DIN 338 3.2 - CYL

€1.95 with VAT €1.95 without VAT
DIN 338 Titanium. Cutting drills are made of high quality (HSS) high-speed steel and have a 2.5µ titanium nitride coating. TIN coating hardens the surface up to 80HRC and is wear-resistant. TIN coating causes less friction effect, therefore, a cutting drill drills faster and generates less heat. 135 degree double-sharpened drill is designed for faster speed and easier drill centering. Recommended to drill the materials the hardness limit of which is up to 1000 N/mm2.
IRWIN HSS TURBOMAX 3.5 X 70
Irwin

IRWIN HSS TURBOMAX 3.5 X 70

€5.41 with VAT €5.41 without VAT
Benefits: • Jet Point tip - longer lasting sharpness, does not ride on the drilling surface. • 100º sharpening angle - faster drilling, better centring, no need to apply pressure when drilling. • Special edge design - clean drilled hole, extra round hole when drilling sheet steel. The tool is used for: • For sheet steel. • For sheet steel. • Aluminum. • For non-ferrous metals. • All types of wood. • Plastic.