Out-of-Stock

Out-of-Stock

Specialist+ Cobalt drill bit 5.5mm

Shipping to Itella Smartpost - For free!

Specialist+ Cobalt drill bits made of HSS steel m35 with 5% cobalt (Co). Specialist+ HSS COBALT metal drill bits are designed for extra hard materials of up to 1100 N/mm2 (steel V2A, V4A), cast iron, titanium. Twist drill bit with a 135 degree angle for harder materials and reliable sharpness.

Quantity

Out-of-Stock

Item code:

10377

Reference code:

4779039130878

Categories:

Main | Hammers |

Shipping price:

Itella Smartpost - For free!

DPD carrier - 4,59 EUR

Important:

• the look of the real item may be a bit beam from those in the photos;

• the product may not be in the original packaging.

You can pick up the goods free of charge at: Veiverių st. 153, LT-46417, Kaunas, Lithuania.

Delivery price depends on the weight of the product, the chosen delivery type and location. Our products can be deliver to most of the European countries. Please put an item into the basket and choose location where to deliver to see exact price*.

*The delivery price of oversized goods may be higher than when calculated by weight (eg: ladder), because one of the dimensions is over 2 meters and so on. There may also be a higher delivery cost for oversized boxes, such as a vacuum cleaner or large machine tool, where it takes up a large volume and must be transported on a pallet. In such cases, the customer is additionally warned about higher delivery costs and has the right to cancel the order, or pick up the goods by their own transport.

*Delivery to islands and less rural places are charged extra by our partners DPD.

After courier delivers parcel, inspect it carefully - the packaging must be undamaged. If you notice that the packaging of the delivered goods is damaged, you must not accept the parcel and note in the delivery and acceptance certificate which is provided by the courrier that it was damaged. Please inform us about damaged goods too by e-mail [email protected] or by phone +370 686 47 132.

Your purchased goods in Europe should reach you within 1-7 working days (weekends not included). Exact delivery times are written in the product card, where it shows if it is available from our main or second warehouse.

You can currently pay for the goods using the following payment methods:

Logo

Name

Information

Klarna

You will be directed to the Klarna payment options which are: credit/debit bank card, 4 installments, pay in 30 days, financing.

Paypal

There is an additional 3% charge for PayPal payment insurance which is taken directly by Paypal bank. This additional insurance fee is automatically added by the bank to cover the additional costs of Paypal customer service.

Bank transfer

You will need to pay according to the received pre-invoice, which we will send to you immediately after creating the order. It is important that you enter the order number in the payment destination. The details of the order will be specified in the sent e-mail.

5 other products in the same category:

Richmann

Metal Drill "Richmann" 10,2 mm

Availability: 3 In Stock

Advantages: - 118° drill tip - easier to centre, less demanding less pressure. - More resilient metal - low risk of breaking the drill. Tool used for: - Steel castings. - For cast iron. - Alloy steel. - For non-alloyed steel. - Non-ferrous metals. - Plastics.

Out-of-Stock

DeWalt

DeWalt SDS-Plus drill set (DT70753-QZ), 10 pcs.

Availability: Out of stock

Irwin

Irwin HSS-Pro TIN 15pcs Set

Availability: 13 In Stock

DIN 338 TITANIUM. Drill bits made of top quality high speed steel (HSS) and provided with 2.5" titanium nitride coating. TIN coating hardens the surface to 80 HRC and is wear resistant. TIN coating produces a lower friction effect thus allowing for higher-speed drilling and lower heating. A 135 degree dual sharpening for higher speed and easier alignment. Recommended for drilling of materials with compressive strength up to 1000 N/mm2. Set includes 1,5; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7; 8; 9; 10 mm drills.

Irwin

Bits Blue Groove 6X 22mm

Availability: 34 In Stock

Cutting Spurs - For clean holes with minimal 'break out' Full Screw Tip - For ease of use and pull through Tapered Flute - For less binding and ease of use - Tri-Flute' Design - For faster chip ejection Full Length Heat Treat - For extra durability

Irwin

HSS PRO TIN DIN 338 8.0 - CYL

Availability: 53 In Stock

DIN 338 Titanium. Cutting drills are made of high quality (HSS) high-speed steel and have a 2.5µ titanium nitride coating. TIN coating hardens the surface up to 80HRC and is wear-resistant. TIN coating causes less friction effect, therefore, a cutting drill drills faster and generates less heat. 135 degree double-sharpened drill is designed for faster speed and easier drill centering. Recommended to drill the materials the hardness limit of which is up to 1000 N/mm2.

All products

MAKITA | BOSCH | DEWALT | MILWAUKEE | METABO | STANLEY | BAHCO | WERA | STEINEL | KNIPEX | DJI

Specialist+ Cobalt drill bit 5.5mm