IR HSS PRO TIN DIN 338 1.0-CYL

€3.96
€3.96
Shipping to Itella Smartpost - For free!
DIN 338 Titanium. Cutting drills are made of high quality (HSS) high-speed steel and have a 2.5µ titanium nitride coating. TIN coating hardens the surface up to 80HRC and is wear-resistant. TIN coating causes less friction effect, therefore, a cutting drill drills faster and generates less heat. 135 degree double-sharpened drill is designed for faster speed and easier drill centering. Recommended to drill the materials the hardness limit of which is up to 1000 N/mm2.
Quantity

9951
5709131282556
New
default shipping time text
Itella Smartpost - For free!
DPD carrier - 4.59 EUR
• the look of the real item may be a bit beam from those in the photos;
• the product may not be in the original packaging.

Data sheet

Delivery time
6-10 work days

You can pick up the goods free of charge at: Veiverių st. 153, LT-46417, Kaunas, Lithuania.

Delivery price depends on the weight of the product, the chosen delivery type and location. Our products can be deliver to most of the European countries. Please put an item into the basket and choose location where to deliver to see exact price*.

*The delivery price of oversized goods may be higher than when calculated by weight (eg: ladder), because one of the dimensions is over 2 meters and so on. There may also be a higher delivery cost for oversized boxes, such as a vacuum cleaner or large machine tool, where it takes up a large volume and must be transported on a pallet. In such cases, the customer is additionally warned about higher delivery costs and has the right to cancel the order, or pick up the goods by their own transport.

*Delivery to islands and less rural places are charged extra by our partners DPD.

After courier delivers parcel, inspect it carefully - the packaging must be undamaged. If you notice that the packaging of the delivered goods is damaged, you must not accept the parcel and note in the delivery and acceptance certificate which is provided by the courrier that it was damaged. Please inform us about damaged goods too by e-mail [email protected] or by phone +370 686 47 132.

Your purchased goods in Europe should reach you within 1-7 working days (weekends not included). Exact delivery times are written in the product card, where it shows if it is available from our main or second warehouse.

You can currently pay for the goods using the following payment methods:

Logo
Name
Information
Klarna
You will be directed to the Klarna payment options which are: credit/debit bank card, 4 installments, pay in 30 days, financing.
Paypal
There is an additional 3% charge for PayPal payment insurance which is taken directly by Paypal bank. This additional insurance fee is automatically added by the bank to cover the additional costs of Paypal customer service.
Bank transfer
You will need to pay according to the received pre-invoice, which we will send to you immediately after creating the order. It is important that you enter the order number in the payment destination. The details of the order will be specified in the sent e-mail.

Trumpai apie prekę

Šis grąžtas, pagamintas iš HSS greitapjūvio plieno su titano danga, pasižymi dideliu efektyvumu ir ilgaamžiškumu. Titano danga ne tik sustiprina grąžto paviršių, bet ir sumažina trintį, kas leidžia greitai gręžti, sumažinant perkaitimo riziką. Dėl 135° kampo grąžto viršūnės ir dvigubo galandinimo jis puikiai tinka kietoms medžiagoms.

Prekės privalumai

  • Pagamintas iš aukštos kokybės HSS plieno, užtikrinančio ilgesnį tarnavimo laiką.
  • Titano danga prailgina gręžimo aštrumą, todėl jis ilgiau išlieka efektyvus.
  • Sumažinta trintis dėl titano dangos leidžia greičiau gręžti ir mažiau kaisti.
  • 135° kampo viršūnė pagerina gręžimo efektyvumą kietoms medžiagoms.
  • Dvigubas galandinimas užtikrina didesnį gręžimo greitį, kas leidžia dirbti efektyviau.
  • Patogu naudoti medžiagoms, kurioje patvarumo riba iki 1000 N/mm2.

Šios prekės trūkumai

  • Gali būti ne tokie pigūs kaip kiti grąžtai, tačiau investicija pateisina save.
  • Nerekomenduojama naudoti labai minkštoms medžiagoms, nes tam skirti kiti tipai grąžtų.

⚠️ This is the opinion of artificial intelligence!

5 other products in the same category:

Hammer drill ARMATURE 6/100 x 160 mm

€6.36 with VAT €6.36 without VAT
Triple Y-shaped tip is superior to hardmetal drills of any other type when drilling reinforced concrete, as the drill bit does not get stuck and does not stray off the path when thick Armature is hit at an angle but it drills through Armature at the spot you need.

Masonry drill bit Specialist 14x160/200

€6.10 with VAT €6.10 without VAT
- Sharp hardmetal - faster drilling. - The drill bit is designed to prevent jamming and remove dust quickly. The tool is used for: - For drilling various masonry materials. - For drilling concrete.

HSS PRO DIN 338 4.80 QUAD PK10

€6.96 with VAT €6.96 without VAT
Made of high quality M2 steel. Precisely accurate. Black oxide coating, an additional protection from corrosion. Convenient informative package. Drill metal up to 900 N/mm2. IRWIN HSS metal cutting drills are designed to drill carbon, alloy,constructive steel, cast iron, wood and plastic.

Specialist+ Drill SDS MAX 20x200/320

€35.95 with VAT €35.95 without VAT
The advantage of Specialist+ Quattro drill bits is its 4-layer hard metal made of solid extra strong metal alloy. It allows to ensure a flawless drilling quality on even hard reinforced concrete. The uniquely-shaped coil guarantees efficient dust removal and very rigid drill bit structure, and prevents breaking of drill bits.

HSS PRO DIN 338 3.20 QUAD PK10

€5.08 with VAT €5.08 without VAT
Made of high quality M2 steel. Precisely accurate. Black oxide coating, an additional protection from corrosion. Convenient informative package. Drill metal up to 900 N/mm2. IRWIN HSS metal cutting drills are designed to drill carbon, alloy,constructive steel, cast iron, wood and plastic.