Drill Makita (6408), 530 W

€126.49 with VAT
€126.49 without VAT Updated 2024-06-01 10:54
Quantity

4474
0088381020558
5-20 work days
• the look of the real item may be a bit beam from those in the photos;
• the product may not be in the original packaging.

Data sheet

Type
Electric
Max. no-load speed
2500 / min
Packaging
Cardboard
Weight
2.2
Max. diameter in wood
36 mm
Max. diameter in steel
13 mm
Chuck
1,5 - 10 mm
Product dimensions (L x W x H)
261 x 68 x199 mm
Sound pressure level (LpA)
79 dB(A)
Sound uncertainty of measurement K
3 dB(A)
Vibration uncertainty of measurement K
1,5 m/sec²
Power consumption
530 W
Vibration level (3 axis)
2,5 m/sec²

You can pick up the goods free of charge at: Veiverių st. 153, LT-46417, Kaunas, Lithuania.

Delivery price depends on the weight of the product, the chosen delivery type and location. Our products can be deliver to most of the European countries. Please put an item into the basket and choose location where to deliver to see exact price*.

*The delivery price of oversized goods may be higher than when calculated by weight (eg: ladder), because one of the dimensions is over 2 meters and so on. There may also be a higher delivery cost for oversized boxes, such as a vacuum cleaner or large machine tool, where it takes up a large volume and must be transported on a pallet. In such cases, the customer is additionally warned about higher delivery costs and has the right to cancel the order, or pick up the goods by their own transport.

*Delivery to islands and less rural places are charged extra by our partners DPD.

After courier delivers parcel, inspect it carefully - the packaging must be undamaged. If you notice that the packaging of the delivered goods is damaged, you must not accept the parcel and note in the delivery and acceptance certificate which is provided by the courrier that it was damaged. Please inform us about damaged goods too by e-mail [email protected] or by phone +370 686 47 132.

Your purchased goods in Europe should reach you within 1-7 working days (weekends not included). Exact delivery times are written in the product card, where it shows if it is available from our main or second warehouse.

You can currently pay for the goods using the following payment methods:

Logo
Name
Information
Klarna
You will be directed to the Klarna payment options which are: credit/debit bank card, 4 installments, pay in 30 days, financing.
Paypal
There is an additional 3% charge for PayPal payment insurance which is taken directly by Paypal bank. This additional insurance fee is automatically added by the bank to cover the additional costs of Paypal customer service.
Bank transfer
You will need to pay according to the received pre-invoice, which we will send to you immediately after creating the order. It is important that you enter the order number in the payment destination. The details of the order will be specified in the sent e-mail.

5 other products in the same category:

Grąžtas „Specialist+" SDS+ 14x160/210 mm

€5.92 with VAT €5.92 without VAT
Availability: 152 In Stock
Privalumai: • Dėl pagerinto kietmetalio įtvirtinimo galima gręžti kietesnes medžiagas, įrankis naudojamas ilgiau. • Keturkampės formos karbido centravimo galiukas - tikslus gręžimas ir idealiai apvali skylė. • Unikalaus dizaino vijos griovelis - efektyviai šalina šiukšles, greitas gręžimas. • PGM sertifikatas – skylė visada vienodo skersmens ir geometrijos, kaištis atitiks gamykloje nustatytas tempimo ir kirpimo jėgas. • SDS+ tvirtinimo standartas. Įrankis naudojamas: • Įvairioms mūro medžiagoms gręžti. • Betonui gręžti. • Armuotam betonui gręžti. • Plytoms gręžti.
AUGER DRILL 18.0X335/400 X 11.0
  • Out-of-Stock

AUGER DRILL 18.0X335/400 X 11.0

€28.36 with VAT €28.36 without VAT
Availability: Out of stock
Long wood drills IRWIN Auger for a clean hole. Easy and quick drilling is ensured due to the special construction of the drill. Solid steel ensures longevity and accurate holes. Tempered surface ensures stable construction of the drill.

IR HSS PRO TIN DIN 338 1.5-CYL

€1.64 with VAT €1.64 without VAT
Availability: 112 In Stock
DIN 338 Titanium. Cutting drills are made of high quality (HSS) high-speed steel and have a 2.5µ titanium nitride coating. TIN coating hardens the surface up to 80HRC and is wear-resistant. TIN coating causes less friction effect, therefore, a cutting drill drills faster and generates less heat. 135 degree double-sharpened drill is designed for faster speed and easier drill centering. Recommended to drill the materials the hardness limit of which is up to 1000 N/mm2.

Bits Blue Groove 6X 22mm

€6.03 with VAT €6.03 without VAT
Availability: 31 In Stock
Cutting Spurs - For clean holes with minimal 'break out' Full Screw Tip - For ease of use and pull through Tapered Flute - For less binding and ease of use - Tri-Flute' Design - For faster chip ejection Full Length Heat Treat - For extra durability

HSS PRO TIN DIN 338 4.0 - CYL

€1.98 with VAT €1.98 without VAT
Availability: 73 In Stock
DIN 338 Titanium. Cutting drills are made of high quality (HSS) high-speed steel and have a 2.5µ titanium nitride coating. TIN coating hardens the surface up to 80HRC and is wear-resistant. TIN coating causes less friction effect, therefore, a cutting drill drills faster and generates less heat. 135 degree double-sharpened drill is designed for faster speed and easier drill centering. Recommended to drill the materials the hardness limit of which is up to 1000 N/mm2.