CERAMIC GRINDING WHEEL FOR SHARPENING 200x8x32 WHITE 99A60K
    CERAMIC GRINDING WHEEL FOR SHARPENING 200x8x32 WHITE 99A60K
  • Out-of-Stock
  • Out-of-Stock
CERAMIC GRINDING WHEEL FOR SHARPENING 200x8x32 WHITE 99A60K
CERAMIC GRINDING WHEEL FOR SHARPENING 200x8x32 WHITE 99A60K
    CERAMIC GRINDING WHEEL FOR SHARPENING 200x8x32 WHITE 99A60K
    CERAMIC GRINDING WHEEL FOR SHARPENING 200x8x32 WHITE 99A60K

CERAMIC GRINDING WHEEL FOR SHARPENING 200x8x32 WHITE 99A60K

€14.33 with VAT
€14.33 without VAT
Shipping to Itella Smartpost - For free!
White ceramic grinding wheel with dimensions 1C - 200 x 8 x 32 mm.Obtained from pure alumina, it is the purest electrocorundum, containing above 99% Al2O3. It is characterized by high hardness and fragility. Used for precise sharpening, e.g. cutting tools, unhardened steel, hardened steel, tool steel. • 45° beveled edges for even more precise grinding. • Discs designed for table grinders. • Meets EN12413 standards. • Premium quality. • The product Polish.
Quantity
Out-of-Stock

11296
5906741647830
Main | Abrasive cutting, grinding discs | Abrasive cutting, grinding discs |
Itella Smartpost - For free!
DPD carrier - 4.59 EUR
• the look of the real item may be a bit beam from those in the photos;
• the product may not be in the original packaging.

You can pick up the goods free of charge at: Veiverių st. 153, LT-46417, Kaunas, Lithuania.

Delivery price depends on the weight of the product, the chosen delivery type and location. Our products can be deliver to most of the European countries. Please put an item into the basket and choose location where to deliver to see exact price*.

*The delivery price of oversized goods may be higher than when calculated by weight (eg: ladder), because one of the dimensions is over 2 meters and so on. There may also be a higher delivery cost for oversized boxes, such as a vacuum cleaner or large machine tool, where it takes up a large volume and must be transported on a pallet. In such cases, the customer is additionally warned about higher delivery costs and has the right to cancel the order, or pick up the goods by their own transport.

*Delivery to islands and less rural places are charged extra by our partners DPD.

After courier delivers parcel, inspect it carefully - the packaging must be undamaged. If you notice that the packaging of the delivered goods is damaged, you must not accept the parcel and note in the delivery and acceptance certificate which is provided by the courrier that it was damaged. Please inform us about damaged goods too by e-mail [email protected] or by phone +370 686 47 132.

Your purchased goods in Europe should reach you within 1-7 working days (weekends not included). Exact delivery times are written in the product card, where it shows if it is available from our main or second warehouse.

You can currently pay for the goods using the following payment methods:

Logo
Name
Information
Klarna
You will be directed to the Klarna payment options which are: credit/debit bank card, 4 installments, pay in 30 days, financing.
Paypal
There is an additional 3% charge for PayPal payment insurance which is taken directly by Paypal bank. This additional insurance fee is automatically added by the bank to cover the additional costs of Paypal customer service.
Bank transfer
You will need to pay according to the received pre-invoice, which we will send to you immediately after creating the order. It is important that you enter the order number in the payment destination. The details of the order will be specified in the sent e-mail.

5 other products in the same category:

  • Out-of-Stock
Specialist

Flap Disc Specialist BASIC 125 ZK60

€1.64 with VAT €1.64 without VAT
Availability: Out of stock
Advantages: - Each diskette has 80 pages. - The high number of sheets ensures the longevity and performance of the disc. The tool is used for: - For sanding wood, metal, plastic. - For smoothing welds. - For shaping wood. - To remove rust. - To sharpen tools.
CERAMIC SHAPING DISK 250 x 25 x 32 99A60K
  • Out-of-Stock
Richmann

CERAMIC SHAPING DISK 250 x 25 x 32 99A60K

€31.56 with VAT €31.56 without VAT
Availability: Out of stock
White ceramic grinding wheel with dimensions of 250 x 25 x 32 mm.Obtained from pure alumina, it is the purest electrocorundum, containing more than 99% Al2O3. It is characterized by high hardness and fragility. Used for precise grinding, e.g.: surface grinding, cylindrical grinding, cutting tool sharpening, unhardened steel, hardened steel, tool steel. • Discs designed for table grinders. • Meets EN12413 standards. • Premium quality. • The product Polish.
RHODIUS FS1 is a grinding disc 125x4 mm
  • Out-of-Stock
Rhodius

RHODIUS FS1 is a grinding disc 125x4 mm

€3.03 with VAT €3.03 without VAT
Availability: Out of stock
FThe RHODIUS FS1 FUSION has been specifically designed for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. The FS1 FUSION grinding disc is an outstanding choice for fillet weld grinding. • The disc is manufactured to EN 12413, safety-tested and certified to oSa standards. • Ideal for fillet weld grinding • Economic alternative to flap discs
Flap disc 125 ZK100
  • Out-of-Stock
Specialist

Flap disc 125 ZK100

€2.49 with VAT €2.49 without VAT
Availability: Out of stock
Advantages: - Zirconia abrasive - highly wear-resistant, higher Higher abrasion resistance, higher gloss. - High number of sandpaper sheets ensures the disc The high durability of the disc. - Convex shape - comfortable sanding of internal corners. - Made in Italy. Certificates: - OSA certificate - safety approved. - ISO 9001 certification - always uniform product quality. - EN12413 certificate - complies with European standards. Tool used: - For sanding wood. - For sanding metal. - For grinding stainless steel. - For grinding concrete.
Electro plated disk GAV 180x22,23
Samedia

Electro plated disk GAV 180x22,23

€27.74 with VAT €27.74 without VAT
Availability: 2 In Stock
Diamonds integrated by galvanisation ensure high accuracy of dry cutting. Suitable for ceramic, marble, plastic and rubber materials.